Grove – BLE (dual model)

#SeeedStudioInAustralia. Check out Grove – BLE (dual model)  v1.0 – features a CSR dual mode Bluetooth chip coupled with the ARM architecture single chip which supports AT instructions. Users can configure the serial baud rate, equipment name and pairing password.

Features:
-BT Version: Bluetooth Specification V4.0 & BLE
-UART send and receive maximum of 512 bytes
-Other device to module in SPP mode: 90 Bytes per packet
-Other device to module in BLE mode: 20 Bytes per packet
-Two data transmission mode, balance mode and high speed mode
-Working frequency: 2.4GHz ISM band
-Modulation method: GFSK(Gaussian Frequency Shift Keying)
-RF Power: -23dbm, -6dbm, 0dbm, 6dbm.
-Speed: Asynchronous: 3K Bytes
-Synchronous: 3K Bytes
-Security: Authentication and encryption
-Service: Slave SPP, Peripheral BLE, UUID FFE0,FFE1
-Power: +3.3/+5.0VDC 50mA
-Long range: SPP 30 meters, BLE 60 meters
-Power: SPP 13.5mA, BLE 9.5mA
-Working temperature:–5 ~ +65 Centigrade

 

Buy Grove – BLE (dual model) from Pakronics:
http://www.pakronics.com/collections/grove-shield-australia/products/ss113020009

Leave a Reply

Your email address will not be published. Required fields are marked *