Intel GENUINO 101

#GenuinoInAustralia. Checkout intel Genuino 101 – a great learning and development board combining low power Intel Curie and simplicity of Genuino (Arduino.cc). Same form factor and peripheral list of UNO with on board Bluetooth LE capabilities and 6 axis accelerometer/gyro.

The module contains two small cores, an x86 (Quark) and an ARC, both clocked at 32MHz. The Quark core operates ViperOS RTOS and assists the Arduino core to accomplish the most demanding tasks. There are 14 digital input/output pins (of which 4 can be used as PWM outputs), 6 analog inputs, a USB connector for serial communication and uploading skech, a power jack, an ICSP header with SPI signals and I2C dedicated pins. The board operates 3.3V but all pins are protected against 5V overvoltage.
Technical specifications:

Microcontroller Intel Curie
Operating Voltage 3.3V (5V tolerant I/O)
Input Voltage (recommended) 7-12V
Input Voltage (limit) 7-20V
Digital I/O Pins 14 (of which 4 provide PWM output)
PWM Digital I/O Pins 4
Analog Input Pins 6
DC Current per I/O Pin 4 mA
Flash Memory for Bootloader 196 kB
SRAM 24 kB
Clock Speed 32MHz
Features Bluetooth LE, 6-axis accelerometer/gyro
Length 68.6 mm
Width 53.4 mm
Buy Intel GENUINO 101 from Pakronics:
http://www.pakronics.com.au/collections/genuino-arduino-cc/products/genuino-101-pakr-m0012

Leave a Reply

Your email address will not be published. Required fields are marked *