RS485 Shield

#ArduinoInAustralia #DFRobotInAustralia

Convert UART/serial protocols to an industrial standard RS485 with RS485 shield. Features standard RS485 port, a mini RS485 port and RS485 headers. It can be switched between automatic mode and manual transmission mode. There is also a enable/disable switch to block this shield while programming Arduino.
Specification:

Power module: +5V
Module size: 55mmx53mm(2.16″x2.08″)
16 digital IO port (including a I2C interface)
6 analog IO port and power
Operation and programming mode switch
Automatic and manual transceiver mode switch (When in manual transceiver mode, the enable end is the 2nd digital IO port)
Transceiver indicating LED
Standard RS485 interface, mini RS485 interface and RS485 pins
Welding area
Reset switch
Buy RS485 Shield from Pakronics:
http://www.pakronics.com.au/collections/dfrobot/products/rs485-shield-dfdfr0259

Leave a Reply

Your email address will not be published. Required fields are marked *